; This is linkit configuration file
; For options please refer to documentation
[main]
data_filename   = dcl_1000v_5700sl_3458sabc_3458abe_nplc50_soak25s.csv ; # Filename for DSV input
reference_value = 1000                                                                 # Reference for ppm delta calc on the vertical axis 
plot_out_filename = dcl_1000v_5700sl_3458sabc_3458abe_nplc50_soak25s.png ;                              # Filename for output PNG plot
plot_out_filename_small = dcl_1000v_5700sl_3458sabc_3458abe_nplc50_soak25s_1.png ;                              # Filename for output PNG plot, small
plot_w = 2000 ; # Width, px
plot_h = 900  ; # Height, px
plot_w_s = 1200 ; # Width, px
plot_h_s = 540  ; # Height, px
baseline_ref_column = 1 ;  # Column used as baseline 0.0 ppm reference. Column 0 is date.
dataset_name1 =  HP 3458A-3
dataset_name2 =  HP 3458A-25
dataset_name3 =  Keysight 3458A BE
dataset_name4 =  HP 3458A-4
dataset_name5 =  Fluke 8508A
dataset_name6 =  Keithley 182-M, 30 V range
dataset_name7 =  3458A (peak)
dataset_name8 =  3458B (peak)
dataset_name9 =  3458C (peak)
dataset_name10 =  3458D (peak)
dataset_name11 =  8508A (peak)
dataset_name12 =  K182-M (peak)

[plot]
chart_title    = Fluke 5700/S, Integral linearity test, +/-1000V sweep, 1kV Range, NPLC50, soak20 ;Name for the chart
y_max =  2 ;                                                                 # Maximum value for Y axis
y_min =  -2 ;                                                                 # Minimum value for Y axis
y_resolution = 0.05 ;                                                         # Y axis ticks resolution
y_label = INL, ppm of best-fit poly 1000 V ;
x_max =  1000 ;                                                                 # Maximum value for X axis
x_min = -1000 ;                                                                 # Minimum value for X axis
x_resolution = 100 ;                                                        # X axis ticks resolution
x_label = Voltage, VDC ;
dataset_color1 = #8817BB ;
dataset_color2 = #FFAA02 ;
dataset_color3 = #006403 ;
dataset_color4 = #e53338 ;
dataset_color5 = #ff3300 ;
dataset_color6 = #c56ac1 ;
dataset_color7 = #ff0000 ;
dataset_color8 = #ffcc22 ;
dataset_color9 = #0000ff ;
dataset_color10 = #ff0000 ;
dataset_color11 = #ffcc22 ;
dataset_color12 = #0000ff ;
run_zcal_mfc   = true ;true to Run 5700 Zero CAL before perf-test)

[dut]
dut_gpib_addr     = 8       ; GPIB Address
dut               = hp34401a ; DUT device type
secure_password   = 0        ; DUT security password
dut_terminal_side = 1        ; 1 - front, 0 - rear
dut_serno         = US36111998
dut_rh            = N/A
dut_idno          = Erik-34401A
dut_testmode      = HLK5720
dut_ref_note      = Direct MFC test, Fluke cables, post-calibration adjustment 1
dut_state_note    = test
dutnote           = Check
header_name       = Agilent 34401A

[standard]
mfc_gpib_addr     = 1     ; GPIB Address
mfc               = f5720  ; (MFC type)
mfcs              = none   ; (MFC type)
mfc_acal          = true   ;(Run Calcheck + reports prior to DUT perf-test)
grd_gpib_addr     = 3     ; GPIB Address for guard reference meter
grd_type          = hp3458a ; Guard reference meter type (used for DCV/ACV/ACI/DCI only)

[siggen]
rf_sg             = none ; Signal generator

[env]
f1620_ip          = 192.168.101.10
f1620_port        = 10001

