xDevs.com Neutron : Automated power supply test unit
Created: 17 August 2015
Article covering design, assembly and usage of our ATE unit for PC ATX power supplies.
Experiment to reducing noise of Keithley 2002 DMM ADC
Created: 09 August 2015
Noise test with various modifications for zero reference opamp on Keithley 2002 ADC
DMM noise measurement test project
Created: 05 August 2015
Test project of bench DMM noise levels evaluation, using DCV ranges and various NPLC settings.
How-to weld own Thermal K probe using common powersupply
Created: 25 July 2015
Simple tutorial for making K-type thermocouple probes from bare wire and high-current power supply
xDevs.com VARM - versatile dual-channel panel meter
Created: 23 July 2015
Simple, yet useful dual-channel voltmeter for panel/embedded used. Open-source/open-hardware project.
DIY upgrade for Fluke 51-II thermometer
Created: 04 May 2015
Modifications for second channel on Fluke 51-II and data logging.
Simple CSV parsers for datalogs in Python
Created: 13 March 2015
How to parse CSV datalog with Python
xDevs.com KX LTZ1000-based DC Voltage reference design
Created: 04 March 2015
Voltage reference module design using Linear LTZ1000 and LM399 ovenized zeners.
Adding I2C0 port to Raspberry Pi B Rev 2.0
Created: 28 January 2015
How to unhide and use second I2C port on Raspberry Pi B (Rev 2.0).
Изучаем Cadence Allegro PCB Editor
Created: 17 September 2014
WIP Article about Cadence Allegro PCB Editor
Memory options on Keithley 2001/2002 series DMMs
Created: 17 September 2014
Configuring memory options STD/MEM1/MEM2 for Keithley 2001 and 2002 series system DMMs
How-to: Powering stand-alone PCIe videocard without MB
Created: 09 August 2014
Using DIY PCIe slot adapter to power VGA without motherboard.
Using Raspberry Pi for rapid prototyping - I2C SPD reader
Created: 09 August 2014
How to programm SPD on PC memory DDR3/DDR4 DIMM using Raspberry Pi.